Computer Controlled High Temperature High Pressure (140 °C-6 bar) Yarn Dyeing Machine
高温高压纱线染色机(140℃-6bar)
Model MINI SIMPLEX (complete with standard accessories) –8 independent kiers. All parts in contact with dye liquor are in stainless steel AISI 316 L.
型号:MINI SIMPLEX (整套标准配件)--8个独立的小染缸,与染液接触的部件为316L不锈钢。
Each kier with:
每个染缸包括:
· Kiers in stainless steel AISI 316L
缸体316L不锈钢
· Dimensions useful to dye 1 or 2 pkg 150 gr each (1 half pack)
容量:1或2个筒纱,每个150g
· Liquor ratio 1:6 (or at customer choice)
浴比:1:6(或按客户要求)
· Open/close lid sensor, open lid alarm
开/关盖传感器,开盖警报
· All safety standard CE mark
所有安全标准的CE认证
· Pressure gauges in front of the kier
压力表
· Thermometer in front of the kier
温度表
· Mechanical pressure safety valve
机械卸压阀
· Max pressure switch (6 bar), low pressure switch (0.2 bar)
压力开关(6bar),低压力开关(0.2bar)
· Max temp switch (150 °C), high (85 °C) temp switch
温度开关(150℃),高温(85℃)开关
· Circulation pump reversible low volume 45lts/kgs*min at maximum load standard density
标准密度装载量下,循环泵可逆低流量45lts/kgs*min
· Product tank: capacity 25% of the main kier, provide with water rinsing ring, lid, analog level probe, dosing pump, dosing curves and flow back from kier to the product tank.
副缸:主缸容量的25%,配有环形喷水管,盖子,液位探针,投药泵,比率曲线加药,从主缸回流至副缸
· Automatic filling to level, draining, hot draining, overflow rinsing from top of the lid
自动进水,排水和清洗
· Air pad system with regulator, independent lines for air pad
可调的气垫系统,独立管路
· Steam /Electric heating
蒸汽/电加热可选
· Water cooling
水冷
· Controller: Setex 575
控制器:Setex575
· Dyeing accessories. Each kier with:
染色辅件 每缸配备:
· 1 triangular column φ30mm
锥形纱管 直径30mm
· 1 top plate and 1 intermediate plate and 1 locking nut
1个**片,1个中间板和1个锁头
· Set of connectors (for water inlet, cooling inlet, air pressure inlet)
1套连接管路(进水,冷却水,压缩空气)
· Set of mechanical and electrical spare parts
1套 机械和电气控制配件
· Voltage: 400 V (3 phases) +/15%,-20% - 50/60 Hz +neutral
电源:400V(3相)+15%,-20%; 50/60Hz 接地
Ugolini S.r.l 成立于1970年,由机械工程师Umberto Ugolini创立,在此之前他为位于Schio(维琴察)的ILMA纺织机械部门设计和制造染色机25年。之后,他将所有的技术专长和“专门知识”都注入于公司。
得益于专业知识和经验,以及合格的机械和电子工程师的支持,Ugolini公司从一开始就十分注重创新,现在向**的纺织公司提供广泛的产品。 Ugolini产品可分为染色机、染色试验机和不锈钢配件,干燥和脱水机(离心机脱水机)和染色自动化四大类。 在过去几年中,与世界主要纺织集团的合作,公司越来越多地专注于小样、中样和大批量生产用染色机,在**获得了较佳的声誉。从设计到制造管理所有的生产阶段,具有很强的技术能力:所有的制造都是在自己工厂进行,满足交货期限的同时保证持续的高品质。
所有这一切的目的不仅在于提供符合客户要求的产品,而且还提供技术咨询,从而创造长久的关系。 这一政策的积极成果体现在世界各地越来越多的客户中。Ugolini 公司完全专注于国际市场,其出口销售额占其年营业额的较大部分。 产品质量通过国际认证,设计和制造符合各种标准,如:PED,ASME,TUV,ANFOR,SELO等。